I have a read and write message in a 1768-L43 Micrologx5343 they are writing too and reading from a SLC5/05.
The messages are frozen on enable and do not change state or time out, they just sit there I have never seen this before has anybody else.
The customer says the com between the two processors worked before.
I can see the target Processor on links. Any Ideas.
The messages are frozen on enable and do not change state or time out, they just sit there I have never seen this before has anybody else.
The customer says the com between the two processors worked before.
I can see the target Processor on links. Any Ideas.