If you are using AdvancedHMI, there is no need to buy Zebra Enet/IP firmware, use Zebra's LinkOS SDK.
Thanks for the suggestion. I already have a CompactLogix L24ER and Panelview Plus 7 HMI. This is standard hardware for us... This printer is new territory for me... We also use Siemens S7-1214 PLC and TP700 HMI. For that system we use a Gebe printer that works ok... Getting a AB printing solution has always been a challenge. Even when I went to the AB Automation fair in Philadelphia this year, no AB representatives had a good solution for printing from an HMI. The AB printer list is outdated...