HoldenC
Member
I have a currently running PLC (Control Logix) with a computer connected running FTV ME Station for the HMI. Everything is connected via ethernet.
We have a 2nd PLC (Compact Logix) that supports ethernet that is only connected its own HMI.
Today, I changed the ip address of the Compact Logix, and its HMI to get them on the same network as our ControlLogix processor.
Everything shows up under RsLinx as being good.
I go into FTV Studio and Studio and browse for the online tags that I want to monitor from the newly connected PLC and add them to my current display.
When I create the new application and load it back to the computer running FTV ME Station, everything works, but the added tags are only showing as asterisk.
However, if I run the program from my laptop that I created the display on using my own version of FTV ME Station, everything works fine.
The only difference is my laptop is running version 12, and the other is running version 11. Could this be the issue ? I
We have a 2nd PLC (Compact Logix) that supports ethernet that is only connected its own HMI.
Today, I changed the ip address of the Compact Logix, and its HMI to get them on the same network as our ControlLogix processor.
Everything shows up under RsLinx as being good.
I go into FTV Studio and Studio and browse for the online tags that I want to monitor from the newly connected PLC and add them to my current display.
When I create the new application and load it back to the computer running FTV ME Station, everything works, but the added tags are only showing as asterisk.
However, if I run the program from my laptop that I created the display on using my own version of FTV ME Station, everything works fine.
The only difference is my laptop is running version 12, and the other is running version 11. Could this be the issue ? I