Justin OtherPLC
Member
I have a Mitsubishi FX2N-64MR-UA1 processor. The 1st analog output card is an FX2N-4DA. It requires 24VDC power.
That card is obsolete. The card I received is an FX2N-2DA. There is no 24VDC power supply. It appears to just plug in using the ribbon cable.
I'm familiar with RSLogix 5/500/5000. I'd like to compare temperatures, and use timers to maintain an analog output, but I've never done this before. I reached out to the engineer who was supposed to help, but haven't heard back. I simply need to send a few outputs based on temps, and hold the output until the equipment reaches another temp.
In any flavor of logix this would be easy, but I'm not that familiar with Melsoft.
Any helpful pointers, or links to vids, would be greatly appreciated.
That card is obsolete. The card I received is an FX2N-2DA. There is no 24VDC power supply. It appears to just plug in using the ribbon cable.
I'm familiar with RSLogix 5/500/5000. I'd like to compare temperatures, and use timers to maintain an analog output, but I've never done this before. I reached out to the engineer who was supposed to help, but haven't heard back. I simply need to send a few outputs based on temps, and hold the output until the equipment reaches another temp.
In any flavor of logix this would be easy, but I'm not that familiar with Melsoft.
Any helpful pointers, or links to vids, would be greatly appreciated.
Last edited: