chicane
Member
hmm I don't know where to begin here. This is the first time I've ever really setup a PLC, and i'm having difficulty. The PLC has been setup and got communication with an rs232 through a serial port on the computer fine, but I have to get ethernet. I'm forcing network type to DF1. The computer is connected to a switch and the PLC is also connected to the switch with another cable. When i setup channel configuration in rslogix, is the ip under channel 1 - system supposed to be my computer or the PLC? If it's the PLC how do I find out or assign an IP address to it? Great site by the way, I'll likely be back