1734-ik npn?

theColonel26

Lifetime Supporting Member
theColonel26
Join Date
Feb 2014
Location
West Michigan
Posts
786
Has any one ever tried to do NPN with a 1734-IK counter card?

Common hot? switch the return?

we have these dumb NPN sensors that we always use, and we switched to the 1734-IK because of supply chain issues. So I am wondering if I can do away with the Pull Up resistor.

The manual is super super vague like all good Allen Bradley manuals are..
 

Similar Topics

A
How to get 1734-VHSC24 values?
To get values from an Allen-Bradley 1734-VHSC24 module, which is a high-speed counter module for CompactLogix PLCs, you typically use software...
Replies
0
Views
38
albertarena
A
T
1734-IT2I Power Distribution Requirements
Looking at installing point io, with a 1734-AENTR communications adapter and ten 1734-IT2L modules. In IAB it installs a 1734-EP24DC after every...
Replies
1
Views
97
Mike Nash
M
D
Allen Bradley 1734-AENT issue
Hi everyone, new to forum. Since very long time i having issue with 1734-AENT module, after some period of time its keep stuck in error (simmilar...
2
Replies
27
Views
1,211
TheWaterboy
TheWaterboy
A
1734-IE4C with isolated signals
I am trying to use the 4-20 mA signals from a device whose user manual says that it outputs "isolated 4-20 mA". I only have spare PLC inputs in a...
Replies
3
Views
280
A_G
A
S
Is it possible to add 1734-AENTR and its input, output card while CPU is in RUN?
Hello The plant is running and there is no shutdown nowadays therefore I can add 1734- AENTR and its card while PLC is in Run? I do not wanna...
Replies
8
Views
391
Renegade65
R
Back
Top Bottom