1756-HIST2G Historian ME

Bullzi

Lifetime Supporting Member
B
Join Date
Jun 2012
Location
Colorado
Posts
1,530
Just starting a new project. One of the modules spec'd is a 1756-HIST2G FactoryTalk Historian ME. Has anyone ever used this module before? Any advice on implementing it? There seems to be a minimum Firmware version but nothing that shows the max Firmware version. Since I was able to add it to my v21 project does that mean it will work with v21?

I have downloaded the Manual and I am looking at it but just want to start out on the right foot. Thanks for any advice you can give.
 
I wouldn't worry about it.
If Studio 5000 "took" the revision at hand you'll be fine.
Historian ME modules are totally different "creatures" than any other mainstream 1756 hardware.
 

Similar Topics

Y
1756-HIST2G - Controlloigx
Anyone any idea how to install the Historian Module into the controllogix rack configuration, using RSLogix 5000 Enterprise. Dont seem to be able...
Replies
1
Views
1,825
TWS
T
A
1756-IB32/B Power supply issue
We are using Allen Bradly DI module 1756-IB32/B in one of my projects. I'm facing an issue (I'm getting 25 VDC from some of the inputs channels)...
Replies
2
Views
60
robertmee
R
E
1756-ENxTR
Hey Guys, I thought I knew the answer to this, but after some looking I am starting to doubt myself. I thought the 1756-EN2TR would allow you to...
Replies
2
Views
107
tlf30
tlf30
A
How to determine major communication fault with AB 1756- Modules
We had a site where a rat gnawed through some fiber optic cables which (obviously) prevented communication to a remote rack entirely. We, and the...
Replies
3
Views
134
Ken Roach
Ken Roach
W
1756-L85E - 1756-RIO compatibility
We are in the process of converting our plants from PLC5 controllers and 1771 I/O into ControlLogix PLCs and Logix I/O. Up until now we used 1756...
Replies
1
Views
92
robertmee
R
Back
Top Bottom