Bobobodopalus
Member
Hi all,
Im having a weird problem with my panel and i think its the plc causing it but it could be some other component.
When i power up my panel it all lights up happily and looks fine, plc goes into run all looks good.
But after maybe 10-20 seconds of the plc being in run i notice all of the remote io and inverters go into fault displaying B073, loss of ethernet.
This is happening pretty consistently but not every time, i was staring at the plc while it powered up this last time looking for something but i didnt see any error appear on the plc display.
As far as i can see im not losing my 24V power supply or something that might be turning my ethernet switch off
Im having a weird problem with my panel and i think its the plc causing it but it could be some other component.
When i power up my panel it all lights up happily and looks fine, plc goes into run all looks good.
But after maybe 10-20 seconds of the plc being in run i notice all of the remote io and inverters go into fault displaying B073, loss of ethernet.
This is happening pretty consistently but not every time, i was staring at the plc while it powered up this last time looking for something but i didnt see any error appear on the plc display.
As far as i can see im not losing my 24V power supply or something that might be turning my ethernet switch off