Can anyone recomend a Network provider and sim only data contract for remote access

Join Date
Mar 2009
Location
Leeds
Posts
49
We are wanting to start fitting INSYS EBW-H100 romote access modules to our systems to allow us to provide remote access to diagnose problems with conected PLC & HMI'etc.
We've got one setup and working in the office using a vodaphone sim card we normally use in a usbdongle on our laptops to get internet access on site.
The remote access units will only be powered on by the end user if they have a problem so that we can go online to the PLC's and help diagnose problems.
So can any one recommend a provider who has a data sim only contract with a low monthy fee and say 1GB monthy limit. The sim card still needs to work even if its not been conected to the network for months at a time. Thease site could be all over the UK.
 

Similar Topics

I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
Replies
0
Views
132
this a program to send data to barcode printer I want to integrate a new printer in a new machine and i wanted to adapt the old prgram on it but I...
Replies
4
Views
200
I received an email from a student with the following code attached. This is supposed to control a floodgate system, and supposed to be written...
Replies
23
Views
858
does anyone have an install or know if/where i can download it for the following "ABB PS501 Control Builder Plus V2.3 " the software was a free...
Replies
2
Views
121
Back
Top Bottom