Can't connect to Digi IAP any ideas?

Oh my god it's working!!
I changed from Allen Bradley Ethernet to Ethernet/IP on the Digi IAP Network Masters Protocol and rebooted the IAP....
Now to make a configuration backup...

Thanks again Okie for help and encouragement, it was greatly appreciated
 

Similar Topics

B
Digi One IAP Hz can ping, cannot connect Web URL
Has anyone had similar issue? I have a digi one iap modbus tcp converter polling abs RTD data from pump controllers. I am new to the issue, but...
Replies
2
Views
1,460
doctord
D
R
Connect C-More to SLC 5/03 via Digi One IAP
I have a SLC 5/03 connected to an Ethernet network via a Digi One IAP. The IAP is configured to allow the 5/03 to READ from a SLC 5/05 through the...
Replies
4
Views
6,143
cjh
C
C
Connect Digi WAN 3G with PLC Rockwell
Dear All friends, I had trouble with Digi WAN 3G setting to connect with compactlogix PLC ( Rockwell). I can't access to PLC over Internet. Can...
Replies
1
Views
2,651
Ken Roach
Ken Roach
K
Configuring Stratix 5400 to connect to a Stratix 5700
Greetings, I had an issue with a RIO rack 2 and IFM I/O Link dropping on my network. I would loose connection for a second or 2 then they would...
Replies
3
Views
109
harryting
H
Suhail
help me out to connect lenze i700 to PC
Hi friends, i need a help to know the procedure and steps to connect Lenze i700 to PC for parameterize. i tried with lenze easy-starter using LAN...
Replies
0
Views
61
Suhail
Suhail
Back
Top Bottom