Can't connect to Digi IAP any ideas?

Oh my god it's working!!
I changed from Allen Bradley Ethernet to Ethernet/IP on the Digi IAP Network Masters Protocol and rebooted the IAP....
Now to make a configuration backup...

Thanks again Okie for help and encouragement, it was greatly appreciated
 

Similar Topics

B
Digi One IAP Hz can ping, cannot connect Web URL
Has anyone had similar issue? I have a digi one iap modbus tcp converter polling abs RTD data from pump controllers. I am new to the issue, but...
Replies
2
Views
1,449
doctord
D
R
Connect C-More to SLC 5/03 via Digi One IAP
I have a SLC 5/03 connected to an Ethernet network via a Digi One IAP. The IAP is configured to allow the 5/03 to READ from a SLC 5/05 through the...
Replies
4
Views
6,131
cjh
C
C
Connect Digi WAN 3G with PLC Rockwell
Dear All friends, I had trouble with Digi WAN 3G setting to connect with compactlogix PLC ( Rockwell). I can't access to PLC over Internet. Can...
Replies
1
Views
2,651
Ken Roach
Ken Roach
Z
SCADA Pack RTU 474, IO card (5606) Not responding in Remote Connect
Hi, We have been facing a issue with SCADAPack 474. Configuration is like below. RTU 474 + 6103 PS + 5606 IO Mix Module + 5414 DI Module Only...
Replies
0
Views
66
Zubairjaved786
Z
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
12
Views
351
JesperMP
JesperMP
Back
Top Bottom