gareth.cantrill
Member
- Join Date
- Oct 2004
- Posts
- 51
I am trying to set-up CC-Link for the first time. I have never done this before and I am new to PLC development, so any help would be appreciated.
I only have one board in a module, and im only setting up one station.
I would like to set the following up as printed.
Remote Input (RX) = B0
Remote Output (RY) = B500
But when I do this I get this error, "The range set for the refresh device is not right". What does this mean?
Could anyone suggest a remote address range for me to set. Im slightly confused you see.
I only have one board in a module, and im only setting up one station.
I would like to set the following up as printed.
Remote Input (RX) = B0
Remote Output (RY) = B500
But when I do this I get this error, "The range set for the refresh device is not right". What does this mean?
Could anyone suggest a remote address range for me to set. Im slightly confused you see.