thomas1000
Member
Hi all,
I'm trying to connect an E910 Beijeres Screen on to a CC link Network via a Mitsubishi AJ65BT-G4-S3 Module (RS422 Module). I have configured the CC Network with no errors.
I can not get the screen to communicate with the cpu.
I am using a Mitsubishi Q2AS CPU.
The cc Link module is set for QnA Mode and a comms speed of 19.2K.
A module test has been completed with no errors.
Has anyone used this module for HMI connection or for accessing the CPU via the GX Developer Software.
Any ideas folks.
I'll be thankfull for any information.
I'm trying to connect an E910 Beijeres Screen on to a CC link Network via a Mitsubishi AJ65BT-G4-S3 Module (RS422 Module). I have configured the CC Network with no errors.
I can not get the screen to communicate with the cpu.
I am using a Mitsubishi Q2AS CPU.
The cc Link module is set for QnA Mode and a comms speed of 19.2K.
A module test has been completed with no errors.
Has anyone used this module for HMI connection or for accessing the CPU via the GX Developer Software.
Any ideas folks.
I'll be thankfull for any information.