Murdockske
Member
Hi,
Today I was experimenting a little with TIA portal but I have a problem with changing the addresses of a DP slave.
I've configured the CPU and a profibus network.
On this network, I've connected a DP slave with some input and output cards.
Normally, you should have the possibility to change the I/O addresses of those input and output cards but here, they are gray and I can't find a way to get them white so I can change them.
The cards who are directly mounted next to the CPU are possible to change. It looks like it's only the slaves who are the problem.
I also tried this with a configuring a drive as DP slave ( ABB drive) but still the same problem.
Anyone has an idea?
Today I was experimenting a little with TIA portal but I have a problem with changing the addresses of a DP slave.
I've configured the CPU and a profibus network.
On this network, I've connected a DP slave with some input and output cards.
Normally, you should have the possibility to change the I/O addresses of those input and output cards but here, they are gray and I can't find a way to get them white so I can change them.
The cards who are directly mounted next to the CPU are possible to change. It looks like it's only the slaves who are the problem.
I also tried this with a configuring a drive as DP slave ( ABB drive) but still the same problem.
Anyone has an idea?