Maintenance Man
Member
I just got a work order to change a rusted out box with a bunch of wires going through it. The box has conduits coming from it that goes in 5 directions to different parts of machine. There is main terminal box that the wires terminate in. I am thinking the best way is to unhook all the wires that feed through the box that I have to change. My question is what is the best way to separate these wires so I can get them back to the right locations. There are terminal numbers on the wires. I am sure I just need to pull them all back through the openings in which they enter the rusted box. Does anyone have any advice on a good way to do this. Thank you for your help.