Dear Friends,
I want to know the right procedure to upload the PLC program of S7-200 as this time if i upload the program, the chart "CHT1" under "Status Chart" dont appears(see the attached Img-1. But if i open the original program (having CHT1) and then open CHT1 under status chart, select "Debug-->Start Chart Status" and found the values were changing (see attached img-2). So it need to be underdtand why CHT1 dont appear in uploaded program while it is in PLC memory.
I want to know the right procedure to upload the PLC program of S7-200 as this time if i upload the program, the chart "CHT1" under "Status Chart" dont appears(see the attached Img-1. But if i open the original program (having CHT1) and then open CHT1 under status chart, select "Debug-->Start Chart Status" and found the values were changing (see attached img-2). So it need to be underdtand why CHT1 dont appear in uploaded program while it is in PLC memory.