Codesys V3 fieldbus diagnostics

CMJ

Member
C
Join Date
Jan 2012
Location
-
Posts
1
Hi!

In CoDeSys V2.3 it was possible to link fieldbus diagnostics data (node status) to any available memory area. This was done in the Device configuration. After that it was easily available in the PLC-code.

But I can't find similar feature in the V3. Any suggestions how I can detect node errors in Profibus & Profinet, or any other fieldbus?
 

Similar Topics

M
CodeSys - alternative to Siemens DB
Hello to all, I'm just starting with using CodeSys. Immediately, I have noticed that Codesys doesn't use data blocks like for example S7 does...
Replies
11
Views
182
dwoodlock
dwoodlock
H
Webvisu not showing Codesys V3.5 SP13 Patch 2
Hello, I am using a Hitachi Micro EHV+ for a small project, and I wanted to have a Web visu, done with Codesys V3.5 SP13 Patch 2. I test the...
Replies
7
Views
408
cpiza6599
C
I
Dynamic Text Alignment in Codesys
Hello, I have a requirement to manage the text alignment dynamically. So, for example: 1. English Texts should be displayed from Left in...
Replies
0
Views
107
Indusha M
I
J
Codesys/Modbus/IFM CR1074 display questions
Hello, I am new to Codesys, and am trying to learn about it for a project we're developing. I've got a couple questions, but first a little...
Replies
1
Views
183
durallymax
D
larbi16
How to use Enumeration in Studio 5000 (CodeSys background)
Hi everyone, as this is my first experience with Rockwell Software i would like to know what's the best way to make Enumerations?
Replies
10
Views
534
durallymax
D
Back
Top Bottom