Hello!
While trying to change the bit rate of the 1756-DNB card, I am getting the following error.
"Communication error: 12 while communicating to address 0 communication error string. Error response received. object state conflict"
The 1756 DNB reads "No Tx" prior to and after this error. I/O led is off, MOD/NET LED is red blinking and OK led is blinking green.
I have tried looking it up on the Rockwell website FAQs and DNET manuals. But am unable to find out the reason fro this fault and know how to remedy it.
Can anyone help me out of this one?
THanks!
Omer
While trying to change the bit rate of the 1756-DNB card, I am getting the following error.
"Communication error: 12 while communicating to address 0 communication error string. Error response received. object state conflict"
The 1756 DNB reads "No Tx" prior to and after this error. I/O led is off, MOD/NET LED is red blinking and OK led is blinking green.
I have tried looking it up on the Rockwell website FAQs and DNET manuals. But am unable to find out the reason fro this fault and know how to remedy it.
Can anyone help me out of this one?
THanks!
Omer