I have a micrlogix controller for which the panelview plus 1000 has to communicate with the ethernet.So the problem is my panelview is 30 meters to the controller in the mobile machine(Loader)trhough ethernet cable and sometimes the communication is breaking to the panelview and creating problems.Ethernet cable is linked with ethernet swicth if i test the ping from the place of controller directly connected to switch plc communication is ok but the panelview is giving breaks ,i have changed the cable and checked but problem is same.If break is occured at the operation of the machine it will create the stoppage of machine.Please anybody suggest the ethernet cable fixing so that it will not give any breaks the cable is cat 6 .