serromacher
Member
Hi everyone,
I'm new at the communication between PLC and WinCC Flexible. So I made a few examples with TP panel. But we've bought an new multi touch panel MP277 10".
I tried to insert HMI terminal to my PLC program, After making MPI settings there was an error like the picture below. I don't know where should I connect to HMI IE. If you can help me, i will be greatful to all of you.
Now I'm working with simulator.
[URL=http://img541.imageshack.us/i/mpij.jpg/]
[/URL]
I'm new at the communication between PLC and WinCC Flexible. So I made a few examples with TP panel. But we've bought an new multi touch panel MP277 10".
I tried to insert HMI terminal to my PLC program, After making MPI settings there was an error like the picture below. I don't know where should I connect to HMI IE. If you can help me, i will be greatful to all of you.
Now I'm working with simulator.
[URL=http://img541.imageshack.us/i/mpij.jpg/]
[/URL]