Hi Experts,
I've started a small hobby-project and for this I'm using a S5-115U. I'm using a programming software called PG-2000 (not a "real" Siemens product but it seems to work). I'm able to program the PLC without any problems, so far everything is fine.
Next step, I want to connect a few inputs to the PLC. I've a card with 32 * 24V inputs. I've connected 24 volts and the LEDS are reacting as expected. However, I imagine that I need to configure the hardware (what kind of cards that are connected to the rack). I can not find a setting for this in the software. Or do I need to program this?
All suggestions are very welcome!
Thanks!
//Supporter
I've started a small hobby-project and for this I'm using a S5-115U. I'm using a programming software called PG-2000 (not a "real" Siemens product but it seems to work). I'm able to program the PLC without any problems, so far everything is fine.
Next step, I want to connect a few inputs to the PLC. I've a card with 32 * 24V inputs. I've connected 24 volts and the LEDS are reacting as expected. However, I imagine that I need to configure the hardware (what kind of cards that are connected to the rack). I can not find a setting for this in the software. Or do I need to program this?
All suggestions are very welcome!
Thanks!
//Supporter