Dear colleges
I'am pulling this old thread out of history because I had yesterday an network issue which looked totally the same for me when I had a look in the Log files of my 1756 - EN2T Card.
03/03/22 13:36:49 XXX.XXX.1.70 Device refused a CSPv4 connection, retry using EtherNet/IP
03/03/22 13:36:49 XXX.XXX.1.70 Attempting first connection, protocol = EtherNet/IP
03/03/22 13:36:49 XXX.XXX.1.70 Device has accepted the EtherNet/IP connection
03/03/22 13:36:49 XXX.XXX.1.70 Can't set port type to 288: no Harmony object for this Ethernet
03/03/22 13:36:59 XXX.XXX.0.30 Attempting to reestablish a lost EtherNet/IP connection
03/03/22 13:36:59 XXX.XXX.0.30 Device has accepted the EtherNet/IP connection
03/03/22 13:36:59 XXX.XXX.0.30 Can't set port type to 288: no Harmony object for this Ethernet
03/03/22 13:36:59 XXX.XXX.0.30 Error receiving data from the Ethernet Interface
03/03/22 13:36:59 XXX.XXX.0.30 [10054] Connection reset by peer
03/03/22 13:36:59 XXX.XXX.0.30 EtherNet/IP connection has been lost
03/03/22 13:37:09 XXX.XXX.0.30 Attempting to reestablish a lost EtherNet/IP connection
03/03/22 13:37:09 XXX.XXX.0.30 Device has accepted the EtherNet/IP connection
03/03/22 13:37:09 XXX.XXX.0.30 Can't set port type to 288: no Harmony object for this Ethernet
03/03/22 13:37:09 XXX.XXX.0.30 Error sending data to the Ethernet Interface
03/03/22 13:37:09 XXX.XXX.0.30 [10054] Connection reset by peer
03/03/22 13:37:09 XXX.XXX.0.30 EtherNet/IP connection has been lost
I tried all the troubleshooting steps from this post. In the end it was a huge amount of TCP connections which was flooding my EN2T Card because we installed a bunch of new servers and put them online without telling anybody.
I was able to see this in the normal diagnostics webpage of the EN2T card. After the servers where shuted down, everything was working back normal and now more errors in the error log.
Kind regards Michael
![TCP Connections.PNG TCP Connections.PNG](https://www.plctalk.net/data/attachments/53/53429-1a67a6e27e34004706dde7c5a3388319.jpg)