hello i have connect with hardware level, ask i what software need run to diagnostic communication port, the automation software its ok for this? please if possible tell me steps in software to verify port rs232 is ok, and what others tests is usufull to tes good working the plc
connect pc with b&r plc with rs 232 cable
- Thread starter ttzolab
- Start date
Similar Topics
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
I am using Mitsubishi PLC :FX3g and downloaded the program in it. When I connect Mitsubihi FX2N-4DA expansion module, it lost its communication...
Hi,
The VersaMax PLC suddenly stop running (no LED on run function) so I'm trying to upload the program.
The HMI connected to it says "Host...
hi hello every one .
i have a Omron nt31c hmi and i want to connect with ls plc XBC DR60SU
via rs232 .
do any one now how ??
secondly :i have...