Kev77
Member
I am thinking about trying to connect a Controllogix version 19 to a Adaptive BigDot sign. It looks like this can be done from the serial port on the processor but I need to do this over ethernet. I have the ethernet adapter for the sign but I don't think it will work with ethernet/ip. I currently have a 1756-ENBT card in the rack but am wondering if I need to use an 1756-EWEB card. I was thinking of trying to use a message and addressing it to the sign but am unsure how to configure the message. I have done something like this before but not with an ENBT card.
Has anybody done this before?
Thanks,
Kevin
Has anybody done this before?
Thanks,
Kevin