InstrumentationUK
Member
Hi All,
I want to run a Conveyor belt at two different speeds depending on the signal from a sensor.
Implementing this logic is easy but my problem is, because the conveyor motor has to suddenly accelerate from slow speed to high speed and vice versa, it will damage the motor.
The time gap between the sensor signals is 30 sec and conveyor motor is controlled through a VFD.
Thanks in advance for the help.
I want to run a Conveyor belt at two different speeds depending on the signal from a sensor.
Implementing this logic is easy but my problem is, because the conveyor motor has to suddenly accelerate from slow speed to high speed and vice versa, it will damage the motor.
The time gap between the sensor signals is 30 sec and conveyor motor is controlled through a VFD.
Thanks in advance for the help.