Hi Alaric, when you say 'save it' what exactly am I saving?
Step-by-step....
1. Go online to your controller.
2. Menu "File...Save As"
3. See Pic1 : Change File type to .L5K
4. Click "Save" button - you will be prompted that online tag values may have changed - Click "Yes" to upload tag values before saving project.
5. A new file is created : See Pic2
6. Open the file in a text editor (eg. Wordpad)
7. Find the TAG section of the file : See Pic3
8. Delete
EVERYTHING except the tag values, leaving the comma separators. Your arrays will have produced multi-line output for each tag, as shown in Pic3.
Carefully make each tag single-line (hint: End,5*Delete).
9. Save and close the file.
10. Rename the file extension from .L5K to .CSV : Pic4
11. Double-click to open the file in Excel. Your values should be nicely laid into 128 cells across, 5 down : Pic5 : Check you have 128 entries for all tags (ends at column DX)
12. If all OK - Done : If not - try again