Egcp Alarm Addressing For PLC

shirish

Member
S
Join Date
Mar 2009
Location
Bangalore
Posts
20
Hello Experts

Can anyone please tell me
1. Is it possible to configure EGCP Fault alarms in RSVIEW 32 SCADA (PC) and
Panelview 1000 plus thorugh Micrologix 1100?
IF YES WHAT WILL BE MODBUS ADDRESS for fault alarms?
2 Is it possible to Reset fault alarms through SCADA OR PANELVIEW 1000 PLUS


Thanks & Regards
Shirish Shrivastava
India
 

Similar Topics

V
Egcp-1
Hi, I'm looking the installation manual (i want know the pin-outs) and de modbus register address for an EGCP-1 Woodward. Anyone can help me...
Replies
1
Views
2,877
BobB
BobB
H
woodward egcp-2 to versamax cpu001 modbus communication
egcp-2 from woodward has rs422 port which can be used for modbus communication and gefanuc versamax plc has rs485 port which supports modbus...
Replies
0
Views
3,171
harindra_nath
H
jolio ST
Woodward EGCP-3
Hello guys. I have a question about the EGCP-3 from Woodward company. Anyone who has operated with this hardware or knows the operation of this...
2
Replies
16
Views
6,064
jolio ST
jolio ST
J
CCW Alarm Que
Hey out there, I am trying to build an alarm que in CCW. I have got the FFL and FFU working, however the string that goes with the alarm can't be...
Replies
7
Views
61
SCADA_Joe
SCADA_Joe
E
Factory talk- Alarm and events questions
Hi- I am configuring an alarm and event server to display 1 current alarm at a time on a big display. Having a few issues The alarm doesn't...
Replies
0
Views
73
ereese1991
E
Back
Top Bottom