Egcp Alarm Addressing For PLC

shirish

Member
S
Join Date
Mar 2009
Location
Bangalore
Posts
20
Hello Experts

Can anyone please tell me
1. Is it possible to configure EGCP Fault alarms in RSVIEW 32 SCADA (PC) and
Panelview 1000 plus thorugh Micrologix 1100?
IF YES WHAT WILL BE MODBUS ADDRESS for fault alarms?
2 Is it possible to Reset fault alarms through SCADA OR PANELVIEW 1000 PLUS


Thanks & Regards
Shirish Shrivastava
India
 

Similar Topics

V
Egcp-1
Hi, I'm looking the installation manual (i want know the pin-outs) and de modbus register address for an EGCP-1 Woodward. Anyone can help me...
Replies
1
Views
2,888
BobB
BobB
H
woodward egcp-2 to versamax cpu001 modbus communication
egcp-2 from woodward has rs422 port which can be used for modbus communication and gefanuc versamax plc has rs485 port which supports modbus...
Replies
0
Views
3,175
harindra_nath
H
jolio ST
Woodward EGCP-3
Hello guys. I have a question about the EGCP-3 from Woodward company. Anyone who has operated with this hardware or knows the operation of this...
2
Replies
16
Views
6,178
jolio ST
jolio ST
R
FactoryTalk View SE - Impact of multiple alarm servers
Hi. I need to create several alarm servers in an application, but first I need to know if there is any impact on communication, or if more...
Replies
0
Views
96
Revnus
R
R
FTView Alarm Event Banner - How to configure alarm subscribe exception
Hi folks. I have a system that I'm working on that needs 2 alarms banners with different event subscription: - One banner for a specific area...
Replies
6
Views
228
Cheeseface
C
Back
Top Bottom