Doing some consulting work using factorytalk view studio and RSLogix5000. We set up alarms for the system a while ago and they work fine, as do the alarm banners we have scattered around so that operators can see and acknowledge the alarms in the system. What doesn't work is the alarm summary viewer, the full page list of alarm history. I just logged in today because an operator called me about wanting to be able to see past alarms, and the log shows two from this morning, five from the past year, and then after that the timestamps dip down into the 1990's, then 60s... way before the plant and obviously way before this system. These guys get alarms pretty frequently anyway because some are there as a standard warning just to let operators know something normal is about to happen, so the page should be covered in alarms from the past few days. Any ideas what could be causing this? Have I set it up incorrectly? is the summary viewer the wrong way to go?
Let me know if you need any other information! Thanks guys!
Let me know if you need any other information! Thanks guys!