Flex I/O 5094 CJC

BAJ

Member
BAJ
Join Date
Jan 2006
Location
Maple Grove, MN
Posts
201
Has anyone used or have feedback on using the built-in thermistors for Cold-junction Compensation on the 5094-RTB3T* modules? We have a project with a lot of T/Cs and it would be nice to use all 8 inputs for process vs burning one input per module for CJC. The specs indicate the thermistors are accurate +/- 0.5 deg C, which should be close enough for what we are doing, but I'm curious if there are any other issues to be aware of with using the thermistors for CJC.

TIA,
-Brad
 

Similar Topics

O
Using 1756-EN2TR in Control Logix 5580 (L83e) to connect to FLEX-5000 (5094-AENTR)
Folks, Putting together a system utilizing a Control Logix Gen 8 (5580) PLC w/ the L83e CPU. I'll be connecting to 8 different FLEX-IO drops...
Replies
13
Views
4,147
odwyerpw
O
N
PFlex 753 speed issues
I have a powerflex 753 hooked up by analog 4-20ma. My speed reference doesn't seem to match up properly with the expected speed i command from the...
Replies
3
Views
54
Nova5
N
D
SLC 505 and FLEX I/O 1794-APBDPV1
Hello I have a problem with configuration the Flex I/O profibus module. I have a PLC SLC 505, Profibus scaner on PLC Rack [SST-PFB-SLC] -...
Replies
0
Views
44
DavidDavid
D
W
Powerflex 525
Fairly new to the drive so apologise for the layman terms. Textile machine uses PF525 VFDs to control motors. The speed of the drive is currently...
Replies
5
Views
137
Wardy89
W
G
Powerflex 40 Firmware update
Hello Everyone, I want to upgrade the firmware of Powerflex 40 from 5.001 to 6.002 can anyone tell me how can I do that?
Replies
0
Views
75
ghulamshoaib
G
Back
Top Bottom