I'm trying to make a display open triggered by an Event, but I keep getting:
"The command 'Display' is ignored when issued from the development environment or an HMI Server"
This is a Stand-Alone SE system: one machine is the HMI server and client. (I must be confused).
My PLC communications are setup and working. When I set the bit in the PLC (a 'new alarm' bit), I want my 'Alarm Summary' display to open.
Thanks in advance for any help.
Mark
FTV SE 8.0 StandAlone with CompactLogix
"The command 'Display' is ignored when issued from the development environment or an HMI Server"
This is a Stand-Alone SE system: one machine is the HMI server and client. (I must be confused).
My PLC communications are setup and working. When I set the bit in the PLC (a 'new alarm' bit), I want my 'Alarm Summary' display to open.
Thanks in advance for any help.
Mark
FTV SE 8.0 StandAlone with CompactLogix