ftv studio can't upload or download?

stu

Member
Join Date
Aug 2005
Location
England
Posts
769
Hi guys
I have a quick question , I have an issue where when I go to transfer to a pvp 1250 I can’t download or upload ? I can test the screen on line but when I try and transfer it doesn’t transfer? And times out?
Any ideas, this has worked in the past , it is version 8 ftv studio
Thanks Stu
 
Any chance you somehow deleted all the drivers on the terminal, including the RSLinx Enterprise Ethernet driver ?

My understanding is that RSLinx Enterprise is actually the comms link between the development PC and the PV+ terminal. It's not FTP or some other file transfer protocol.

The fix in such a case is to use the onscreen menus to reset the drivers to defaults.
 
I set up coms shortcut again in enterprise and had the test play made works with data,etc
But still no download?
Thanks stu
 
Does FTView ME give you an Error Number and Text Error when the Upload/Download fails?

Stu....
 
I have found the issue guys IP address had a number missing on the enterprise short cut
My fault fat fingers
Thanks for your help
 

Similar Topics

Hi all, I have FTV v13 installed on my VM. I made an ME application and exported it in v11, as that's the version being used on the Panelviews at...
Replies
3
Views
316
Hello Friends, I want to log FTV Studio SE alarms and event data into a oracle 12c database and as i checked the by default windows in FTAE...
Replies
2
Views
753
Just "upgraded" from v12 to v13. I've noticed that the diagnostic list messages are not nearly as descriptive. In the past, I'd get something...
Replies
0
Views
555
When I create a line in FTV Studio ME (v13 CPR9 SR13 - Patch 17 Build 413) and try to change the line style to anything but "Solid" it just...
Replies
6
Views
1,188
Hi guys. Sorry for the dumb question but I am still new. I have learned to pass Parameters using an HMI tag so far. Can I write directly to the...
Replies
1
Views
840
Back
Top Bottom