Hey everyone! My name is Cody and I'm a programmer for a small custom machine builder. Anyways, I'm working on a testing line that has a PLC, 6 POE cameras, a computer running FTView SE, and a LabView program that is running the actual tests on the part. All of this is run through a Cisco switch that has 12 POE ports and 12 10/100 ports. The problem I've run into is that sometimes (frequently, but it seems to be an on/off type of thing) the buttons on my screen will not register/respond for about 60 seconds (you will hit a button and 60 seconds later you'll see the effect in the program). Now I turned on Event Viewer so I can see exactly what it's doing and I'm seeing that the switch to a "1" (button has been clicked) registers immediately, but the switch back to "0" (button has been released) occurs a minute later.
Has anyone else ever seen a problem like this? I've talked to Rockwell A LOT but they can't seem to pin down the problem.
Has anyone else ever seen a problem like this? I've talked to Rockwell A LOT but they can't seem to pin down the problem.