We have a machine that we need to get running that has a GE Fanuc 90-30 PLC with a 350 CPU. It also has a Motion Mate DSM302 module. What would be your best guess of the programming software I need to be able to get an upload and diagnose why it's not in run mode? I've done a little research and it seems Logicmaster90 or Versa Pro are the likely candidates.
We already have what appears to be a third party programming cable from plccable.com. It's marked with part number IC690USB901. Is that the cable I need?
The PLC was in run mode when we first powered it up but the run LED spontaneously went off without the power going off (or so I'm told) - the BATT LED is on so that's a concern. We've ordered new batteries but are keeping it powered up until they arrive and are changed.
Is there any programming in the Motion Mate module? There's a COMM port on it that looks like an RJ11 or similar. What would I need to be able to upload any programming out of there?
The same question goes for the IC752DPA062-BB HMI.
We already have what appears to be a third party programming cable from plccable.com. It's marked with part number IC690USB901. Is that the cable I need?
The PLC was in run mode when we first powered it up but the run LED spontaneously went off without the power going off (or so I'm told) - the BATT LED is on so that's a concern. We've ordered new batteries but are keeping it powered up until they arrive and are changed.
Is there any programming in the Motion Mate module? There's a COMM port on it that looks like an RJ11 or similar. What would I need to be able to upload any programming out of there?
The same question goes for the IC752DPA062-BB HMI.
Last edited: