Sean Teague
Member
working on a project to change ip address on a machine from 192.168.0.xx to 192.168.1.xx.
My question is this,
I have a Denso pick and place robot on this machine. Its IP address (according to the communication settings in the robot) is 192.168.0.3.
However, the Generic Ethernet Module listed for it in the ethernet tree in the program shows an address on 192.168.0.4
Shouldn't the IP addresses match for the Ethernet Module AND the Robot?
My question is this,
I have a Denso pick and place robot on this machine. Its IP address (according to the communication settings in the robot) is 192.168.0.3.
However, the Generic Ethernet Module listed for it in the ethernet tree in the program shows an address on 192.168.0.4
Shouldn't the IP addresses match for the Ethernet Module AND the Robot?