GEO SCADA scheduling the polling data for multiple DNP3 outstations

mahmoud shahien

Member
M
Join Date
Dec 2013
Location
New Damietta city
Posts
34
Dear Experts,
Thanks in advance for your kind help.

I have a GEO SCADA expert 2022 and configure it as a DNP3 master, also I have multiple DNP3 outstations which are S7-1200.
My client asking me to make a schedule for data polling of each outstation, which means the SCADA server will poll each outstation data at a specific time of the day and all outstations will not communicate at same time of the day to the SCADA.
So, could you help me to execute this task by a smart way as I'm still not expert in GEO SCADA.
Thanks
 

Similar Topics

M
GEO SCADA Changing the Alarm Limit Values on MIMIC by users
Dear Experts, I'm just started working with GEO SCADA and I need your valuable help. Currently, I'm trying to edit the alarm limits on MIMIC...
Replies
0
Views
231
mahmoud shahien
M
J
Geo SCADA tags from SCADApack
Hi all, I am trying to bring in some alarm tags from a SCADApack plc to a Geo SCADA system. The system is existing and configured with working...
Replies
0
Views
1,921
jj2500
J
ZestyMozzarella
Delta Tau PMAC Geo Drive 480VAC
Hi everyone, was hoping I could inquire with the community as I'm stuck in quite a bind. I have a Delta Tau PWM drive model number GPH1020000...
Replies
1
Views
1,495
Peter Nachtwey
Peter Nachtwey
M
Vigeo Designer with Redundant PLC
Dear All, I need to configure the vijoe designer so that the Shneider HMI can communicate with Hot standby (redundant PLC), the communication...
Replies
10
Views
2,709
tragically1969
T
S
Move data from scada to plc
Hello, im quite new and still learning. I would like to ask is it possible for FATEK PLC to read data value more than 16k? I'm trying to move my...
Replies
0
Views
76
Shak
S
Back
Top Bottom