.....I do not need help with this ....
this program is running - sort of - on an existing
machine. apparently came from South Australia
(900 Km's east)it has been running with this fault for three years. RS 5/03
interesting maths - search for N7:0
this is a dual hydraulic press (4 plattens two per die set)
controlled with 4 Analogue outputs to Proportionate valves
Using 4 analogue Inputs - Linear Pots - each connected to
one platten.
THE OPERATION
All four Plattens are fluctuating back and forward (1st Slide)
or Up and down (2nd Slide) by about 10~20mm
Both Open and Closed positions
ENJOY
this program is running - sort of - on an existing
machine. apparently came from South Australia
(900 Km's east)it has been running with this fault for three years. RS 5/03
interesting maths - search for N7:0
this is a dual hydraulic press (4 plattens two per die set)
controlled with 4 Analogue outputs to Proportionate valves
Using 4 analogue Inputs - Linear Pots - each connected to
one platten.
THE OPERATION
All four Plattens are fluctuating back and forward (1st Slide)
or Up and down (2nd Slide) by about 10~20mm
Both Open and Closed positions
ENJOY