How to run plc prog. ?
- Thread starter dsimm11
- Start date
MarkNightingale
Lifetime Supporting Member + Moderator
Post what you have done (zip it first) and we will take a look.
Mark
Mark
Steve Bailey
Lifetime Supporting Member + Moderator
RSLogix 500 is the programming software that you use to create a program that runs on a MicroLogix or SLC PLC. Now that you have written the program you have to establish a connection between your computer and your PLC, download the program to the PLC, and put the PLC into RUN mode.
Similar Topics
Hello all , i just bought a plc 5 ,and changing the key lock switch does not put the processor in either run or program mode. I can only do this...
Hello..I am new to Plc.I have Mitsubishi Melsec Fx3Ga-40MR PLC controlling a machine for packing powder.Currently the Plc has issue which power...
I have an issue with Power Flex 525 during running processing, the VFD stopped suddenly while the PLC and VFD connection ok, VFD does not have any...
Hello everyone!!, I may be asking a newbie question, but I want to be sure of that.
Can I run a PLC program directly from the SD card? I mean, I...
I'm in possession of an Allen Bradley, Micro 820, 2080-LC20-20QBB that's password protected and currently in run mode. The PLC was shipped to me...
