Hi,
I want to connect a RH transmitter on a 1746-NI8 card on my SLC500.
I'm just a little bit confused about the wiring
Here's what I have :
If I understand I need to connect :
Thanks
Martin.
I want to connect a RH transmitter on a 1746-NI8 card on my SLC500.
I'm just a little bit confused about the wiring
Here's what I have :
If I understand I need to connect :
- +24VDC on the power connecter on the RH transmitter (coming from 24VDC pôwer supply for exemple)
- Wire from OUT on the RH transmitter to the Input+ on my 1746-NI8 card
- -24VDC to the INPUT- connecter on my 1746-NI8
- Make sure that my input is in 4-20mA mode. (DONE)
Thanks
Martin.