Hi, I am working on IFM CR0032 and I'm new to codesys too. I need some help with handling analog parameters in codesys. I am using a pressure sensor whose output is current (4-20 mA). To convert this into digital value and use for programming in codesys, what should I do??? Need help
IFM CR0032 analog parameters
- Thread starter aditihp
- Start date
http://www402.abbext.com/How-deal-analogue-signal-software-CoDeSys-plz-AI-4MA-AO-20MA-AI-20MA-AO-4MA-q15787.aspx
The above thread may help.
Regards,
Garry
http://www.accautomation.ca
The above thread may help.
Regards,
Garry
http://www.accautomation.ca
Thank you!!!
Similar Topics
Hi Everybody, I Have an issue with IFM 02d224 camera. the camera communicate with contrologix PLC by ethernet. there are two applications in the...
Hello,
I am new to Codesys, and am trying to learn about it for a project we're developing. I've got a couple questions, but first a little...
How can I integrate my S7-300 Simatic with the IFM AS-i Master AC1335 and its slave IOs, such as 2411 and Airbox 2041, into Simatic Manager?
When adding an IFM AL1322 IO-Link Master Module to a 1756-EN2T Ethernet Card on a 1756-L82E Controller, The Input and Output data file does not...
Hello,
I have downloaded the IFM AL1327 .eds file and went through the
EDS Hardware Installation process on Studio 5000 v32. It seems to work...