Hi, I'm having some problems to set an internal alarm bell for my FactoryTalk View SE application, any help will be appreciated.
first step, I set some alarms at alarm and event setup and configured them to seveity 1.
second step, on HMI Tag Alarms/Alarm Setup, Severities Tab, I checked Internal Bell for severity 1.
third step, Configured exclamation sound on windows (control Panel/sound and audio devices/ sounds tab/ program events field/ exclamation
I can see on the alarm banner that my alarm is "on" but there is no sound!
ps:speakers are on.
I appreciate any help.
Sory about my english.
André Tarlá
first step, I set some alarms at alarm and event setup and configured them to seveity 1.
second step, on HMI Tag Alarms/Alarm Setup, Severities Tab, I checked Internal Bell for severity 1.
third step, Configured exclamation sound on windows (control Panel/sound and audio devices/ sounds tab/ program events field/ exclamation
I can see on the alarm banner that my alarm is "on" but there is no sound!
ps:speakers are on.
I appreciate any help.
Sory about my english.
André Tarlá