Hi all, New here and new all round to PLC`s. We have a servo drive that runs a cross travel beam backwards and forwards. I am having trouble with the servo motor stopping. Accelerates and decelerates smoothly when in automatic. When ran in jog however the motor stops dead when the jog button is released and looks like it will be a problem to have it stop dead like this. Also stops dead when the e-stop is pressed or the safety gates are opened mid travel. Is there anything I can do to get the motor to stop gradually in both of these situations or at least with the jog situation.
Any Help will be much appreciated.
Walt
Any Help will be much appreciated.
Walt