Baker in Virginia
Member
Good Afternoon ,
I modified a machine. Replaced a MicroLogix 1500 with a CompactLogix 1769-L18ER-BB1B , and added 3) PowerFlex 40 Drives / Ethernet/IP drives.
I took notice that I have 2 SEW Motors that I would like to replace with Servo Motors. I am looking at Kinetix 350 Servo Drives. I was told from my AB supplier that I will need a 1769-L18ERM-BB1B for motion. I am using a CompactLogix L18ER just fine with 3 PowerFlex 40 Drives with Ethernet . I am able to control speed , acceleration , deceleration , etc. just fine with the L18ER. My question is , do I really need the 1769-L18ERM , to tell the Kinetix 350 to drive the servo from 22mm to 32mm ?
Thanks so much.
Take Care,
I modified a machine. Replaced a MicroLogix 1500 with a CompactLogix 1769-L18ER-BB1B , and added 3) PowerFlex 40 Drives / Ethernet/IP drives.
I took notice that I have 2 SEW Motors that I would like to replace with Servo Motors. I am looking at Kinetix 350 Servo Drives. I was told from my AB supplier that I will need a 1769-L18ERM-BB1B for motion. I am using a CompactLogix L18ER just fine with 3 PowerFlex 40 Drives with Ethernet . I am able to control speed , acceleration , deceleration , etc. just fine with the L18ER. My question is , do I really need the 1769-L18ERM , to tell the Kinetix 350 to drive the servo from 22mm to 32mm ?
Thanks so much.
Take Care,