Glad that you are making progress. There are way too many things controlling the left side of the TON in rung 5. Remove everything and then add only the Open Limit Switch LS1 as XIO. Then the TON will only run when the door is up. This is because the LS is mechanically released at the top only. The Preset values are in tenths of a second so 100 would equal 10 seconds. The timer done (DN) should be able to "push" the SHUT button.
Edit:
You might want to just remove rung 4 for the "Ajar" light.
Also, due to the idiosyncrasy of the Simulator, when editing, I couldn't just simply re-address an instruction for the lights to turn on the output. I had to "Cut" the instruction and put a new one in with the address that I wanted to use.
Edit:
You might want to just remove rung 4 for the "Ajar" light.
Also, due to the idiosyncrasy of the Simulator, when editing, I couldn't just simply re-address an instruction for the lights to turn on the output. I had to "Cut" the instruction and put a new one in with the address that I wanted to use.
Last edited: