Matthias von Zorn
Member
Hey all. Im back with some more omron questions. Im having the issue that when I power off the PLC, I loose all the data in my PLCs memory. Its not loosing its program, but all its setpoints, etc. So, everytime we power up, I loose all my PID settings, All my alarm limits, etc. I tried setting dip switches 2 and and or 7 on the PLC, but they didnt seem to work. Its in the W memory area. There is a battery, and it seems to be hooked up as well. Obviously there must be someway to keep variables alive between power ups. Thanks in advance.
Matt
Matt