saravanssk
Member
Hi,
How to configure Powerflex drive to Micrologix 1400 through Ethernet TCP/Ip or Modbus TCP. Is it any particular modbus addresses for accessing the drive parameters. And also I need to communicate with Panel view HMi 6 inch 600 model for entering the speed reference, fwd/rev, start, stop etc., And write the Hmi Inputs to drive. Around 10 drives i need to communicate with HMI and ML1400 . Pls guide me .. Any sample files pls attach the file.
Best Regards
Saravanakumar
How to configure Powerflex drive to Micrologix 1400 through Ethernet TCP/Ip or Modbus TCP. Is it any particular modbus addresses for accessing the drive parameters. And also I need to communicate with Panel view HMi 6 inch 600 model for entering the speed reference, fwd/rev, start, stop etc., And write the Hmi Inputs to drive. Around 10 drives i need to communicate with HMI and ML1400 . Pls guide me .. Any sample files pls attach the file.
Best Regards
Saravanakumar