I currently have a Micrologix 1100 Ser A that is continually faulting out and I am wanting to install the program into a brand new Micrologix 1100 Ser B out of the box. I have changed the controller to the correct series and when I try to download the to the new controller it says that current settings do not match system settings and it shows the current driver as AB_ETHIP-1 and driver current on the machine to be AB_DF1-2 and then asks me if I want to replace project settings with current settings.... Long story short.. I can download the program to the new MicroLogix 1100 but the communications protocols revert back to AB_DF-2 and will not accept the AB_ETHIP-1 driver...