shoelesscraig
Member
Quick simple question (I think)...
I have a ML1100 that already has an Automation Direct HMI connected to the 9pin (round) serial port on the side. I was wanting to connect a bar code scanner to this PLC, but I assume I cannot since the serial port is already used for something else. Just wanted to make sure I'm not missing something before I decide this cannon be done (without buying some new equipment).
This is my first ever dabble in the world of bar code ASCII, so I figured I should ask just to make sure. Thanks ahead of time.
I have a ML1100 that already has an Automation Direct HMI connected to the 9pin (round) serial port on the side. I was wanting to connect a bar code scanner to this PLC, but I assume I cannot since the serial port is already used for something else. Just wanted to make sure I'm not missing something before I decide this cannon be done (without buying some new equipment).
This is my first ever dabble in the world of bar code ASCII, so I figured I should ask just to make sure. Thanks ahead of time.