Hey All!
Using the HSC:0 for an unwind. Not high speed or anything.
50 PPR at fastest 800 FPM.using this math
pulse count per second / 50 the ppr * 60 for seconds = rpm
When I look at the data and do the math by hand it is right on
But letting it do the math in a cpt block it is really off.
Any Ideas?
Using the HSC:0 for an unwind. Not high speed or anything.
50 PPR at fastest 800 FPM.using this math
pulse count per second / 50 the ppr * 60 for seconds = rpm
When I look at the data and do the math by hand it is right on
But letting it do the math in a cpt block it is really off.
Any Ideas?