Secpcb
Member
I have a project I want to do with a ML1400 [1766-L32BXB Ser B] listed as having relay outputs. However 6 of the 'relay' outputs are FET outputs.
A couple of the outputs will be wired for 120VAC [OK so far] but the rest of the outputs will be 12VDC. [All inputs will be 12VDC which the unit is rated for]
I have read through the manuals I downloaded from AB.com and nowhere does it have any spec's on the FET outputs, like the operating voltage - only that they are DC only.
Will the FET outputs work on 12VDC? I will need to use at least 3 of them and all of the relay outputs for this project. Or will I have to wire these to the 24VDC powering the PLC and add interposing relays to control the 12 volts?
A couple of the outputs will be wired for 120VAC [OK so far] but the rest of the outputs will be 12VDC. [All inputs will be 12VDC which the unit is rated for]
I have read through the manuals I downloaded from AB.com and nowhere does it have any spec's on the FET outputs, like the operating voltage - only that they are DC only.
Will the FET outputs work on 12VDC? I will need to use at least 3 of them and all of the relay outputs for this project. Or will I have to wire these to the 24VDC powering the PLC and add interposing relays to control the 12 volts?